Mini excavators generator Maintenance


The Mini excavators generator of the nante nt8 excavator is very important. If there is a problem with the nante excavator generator, there will be a series of problems, such as insufficient battery power, insufficient brightness of work lights, and insufficient power displayed on the instrument panel. In serious cases, the nante excavator instrument panel and computer panel will be damaged. Since the generator is so important, what problems should be paid attention to in the daily maintenance of the generator? Let's discuss it.
 
1, Check whether the mini digger kubota generator bearing is short of oil or the lubricating oil is dirty.
If the bearing of the mini digger kubota generator lacks oil or is poorly lubricated, the rolling resistance of the bearing will be too large, and the outer race and inner race of the bearing will rotate synchronously, which will lead to excessive wear between the bearing and the bearing seat. Excessive bearing wear will cause friction between the rotor and stator of the generator, resulting in overheating of the generator and instability of the voltage and current of the generator.
Check the mini digger kubota generator bearing for lack of oil or poor lubrication
 
Check the 2 ton tailless small digger length of the carbon brush. If the length of the 2 ton tailless small digger carbon brush is less than 5mm, replace it in time.
The 2 ton tailless small digger carbon brush on the generator plays a very important role. The current is generated by the carbon brush, slip ring and exciting coil, and the mini digger generator generates electricity by cutting the magnetic field through the coil. If there is a problem with the mini digger carbon brush, the generator will not produce a magnetic field. Without a magnetic field, there is no way to generate electricity. In addition, if 2 ton tailless small digger brushless generator is adopted, the length of carbon brush can be ignored. www.haiqinmachinery.com