For the T1800 Telelader As the foundation of the telescopic loader's electronization and automation, the importance of the generator is self-evident. If the generator has problems, there will be a series of problems, such as insufficient battery power, insufficient brightness of work lights, insufficient power displayed on the dashboard, and even damage to the dashboard and computer board. Since the generator is so important, what problems should be paid attention to in the daily maintenance of the generator? Let's talk about it briefly.
1. Check whether the telescopic loader slip ring (also called contact ring) of the generator is dirty.
Check the heracles TL3500 loader engine slip ring
As the rotor is rotating, the excitation current is transmitted to the rotor winding (excitation winding) through the contact of carbon brush and slip ring. Therefore, once the slip ring is dirty, the excitation current will not be transmitted to the excitation winding of the rotor, so the Mammut T2500 Loader generator will not generate electricity.
2. Check whether the T3500 telescopic loader rotor and stator of the generator collide.
Check whether the telescopic loader hytek engine rotor collides with the stator
If the rotor collides with or rubs against the stator, Mammut T2500 Loader will cause the rotor and stator to heat up, which will make the current and voltage of the generator unstable, and in serious cases, the generator will be damaged or the electronic components on the excavator will be damaged. If the rotor collides or rubs with the stator,
the bearing, end cover or casing of the generator are generally worn or deformed. www.haiqintop.com