The performance testing of the lubrication system requires targeted one-time performance testing of various components of the lubrication system to ensure accurate indication on the oil pressure gauge and transmission pressure gauge. Conduct a systematic inspection of the oil in the transmission, torque converter, and drive axle, and ensure that the oil is clean.
The oil film strength between the transmission components with high loads is insufficient, causing early wear of the transmission components and thus unfavorable lubrication. At the same time, during normal operation, the gearbox generates a small amount of bubbles due to the stirring of gears. In order to prevent the accumulation of bubbles and the occurrence of cavitation, which can reduce the thickness of the oil film and affect the operation of the clutch and its control valve inside the gearbox, the gearbox oil must have anti foaming properties. Therefore, using appropriate transmission oil can not only protect the transmission, extend its service life, reduce the failure rate of the transmission, but also reduce the direct cost of transmission oil change and maintenance, as well as reduce the maintenance labor and parking time of the transmission.Choosing high-quality lubricating oil, the wear of the transmission mechanism of the entire machine under high temperature conditions largely depends on the quality of the lubricating oil used. Long term experiments have shown that using lubricating oil with high viscosity can reduce wear of the transmission system. Apply high viscosity lubricating oil. www.haiqinmachinery.com