4x4 backhoe loader In addition, check whether the brake system is normal, including whether the brake and hand brake can work normally, and whether the brake oil is sufficient. JCB 4CX backhoe loader is also necessary to check whether the telescopic forklift loader light of the forklift is normal, such as whether the headlights, rear lights, brake lights, etc. are on.firstly, lubricants should be selected reasonably. Normal lubricant categories should be selected according to the types and application structures of excavators, appropriate quality grades should be selected according to the requirements of second hand backhoe loader, appropriate quality grades should be selected according to the requirements of excavators, and appropriate lubricant brands should be selected according to the working environment and different seasons of excavators. In use, neither low grade lubricants nor other types of lubricants can be used, nor inferior products can be used. Second, the quantity and quality of lubricants should be checked frequently. If the quantity is insufficient, it shall be supplemented in time, and if the quality is poor, tractor backhoe,backhoe loader jcb shall be replaced in time. Under emergency conditions, the lubricant substitutes of different types and brands must clean the lubrication system afterwards and replace the normal lubricant in time.Secondly, the daily maintenance of forklifts includes regular oil and filter changes.Oil and filters are important components of forklifts that require regular replacement to ensure that the forklift's engine can maintain good operating conditions. www.haiqinmachinery.com