Telescopic wheel loader and telescopic forklift maintenance way :
From my experience You need to check the tires for any abnormalities and the telescopic loader mini stability of the air pressure.
Check if telescoping mini loader there is significant wear on the excavator bucket teeth. It is understood that the wear on the bucket teeth will significantly increase the resistance during the application process
In my project telescopic forklift loader Seriously affecting work efficiency and increasing wear and tear of equipment components.
Based on my experience Check for cracks or oil leakage in the stick and cylinder. Check the battery electrolyte to avoid the rabbit being below the low water level.
I have tested The air filter is an important component that prevents a large amount of dusty air from entering the excavator and should be regularly inspected and cleaned.
Clean the hercules wheeled loader interior of the cooling system; Check and tighten the track plate bolts; Check and adjust the mini wheeled telescopic loader 770t anti tension of the track; Check the intake heater; Replace the bucket teeth; Adjust the clearance of the bucket; Check the level of front window cleaning solution; Check and adjust the air conditioner; Clean the floor inside the driver's cabin; Replace the crusher filter element (optional accessory). When cleaning the interior of the cooling system, wait for the engine to fully cool down, slowly loosen the water injection cap, release the pressure inside the water tank, and then release the water; Do not perform cleaning work while the engine is working, as high-speed rotating fans can pose a danger; When cleaning or replacing the coolant, the machine should be parked on a level surface; To replace the coolant and corrosion inhibitor. www.haiqinmachinery.com