The Schaffer Telescopic Boom Wheel Loadersmain maintenance items for telehandlers shifts include:
Telescopic Loader Heracles is necessary to prevent overload operation at low temperature, ensure normal operation at low speed preheating stage, and make the excavator drive or work after reaching the specified temperature. Do not neglect its important work because there is no problem at that time; Second, the excavator shall be prevented from running under high temperature. During the operation of the excavator, the values on various temperature gauges shall be checked frequently to find problems
1. Remove the Bruder Mini Telescopic Loader external oil sludge and dust from the tractor, pay special attention to all fuel ports, and remove the grass and mud blocks that are blocked in the walking part.
2. Check and tighten Bruder Mini Telescopic Loader all screws and nuts
3. Check the oil level and lubrication maintenance points according to the lubrication chart requirements in the tractor user manual.
4. Check the operation of the engine and various parts of the chassis, as well as whether all instruments are working properly and whether the control mechanism is in good condition.
5. Check the telescopic loaders,tension of the fan belt and the sag of the track, and adjust it if necessary.
6. Check the telescopic wheel adder dust in the dust cup of the primary air filter. When the dust reaches 1/2 of the volume of the dust cup, it should be poured out.
7. Check the water level in the water tank and add it if necessary , www.haiqinmachinery.com