taian loader 2500 with CE,4t telescopic loader with cummins engine


 4t telescopic loader Pre machine inspection and maintenance. 1. 4t telescopic loader Oil level inspection: If the oil level is below the mark on the oil dipstick, special oil should be added in a timely manner. 2. Hydraulic transmission oil level inspection: Check the rear transmission oil level of the tractor. 3. Diesel fuel quantity inspection: Check if the fuel tank needs to be refueled. 4. loading shovel telescopic  Engine water tank inspection: Check for water shortage and add it promptly if necessary. 5. Check if the mechanical lubrication system is functioning properly and apply grease in a timely manner. 6. Check if er1500 telescopic loader there are any loose screws on the loading shovel telescopic  vehicle components and tighten them in a timely manner. As the rotor is rotating, the excitation current is transmitted to the rotor winding (excitation winding) through the taian loader 2500 contact of carbon brush and slip ring. Therefore, once the slip ring is dirty, the excitation current er1500 telescopic loader will not be transmitted to the excitation winding of the rotor, so the generator will not generate electricity.
f the chinese telehandler bearing of the taian loader 2500 generator lacks oil or is poorly lubricated, the rolling resistance of the bearing will be too large, and the outer race and inner race of the chinese telehandler bearing will rotate synchronously, which will lead to excessive wear between the bearing and the bearing seat. Excessive bearing wear will cause friction between the rotor and stator of the generator, resulting in overheating of the taian loader 2500 generator and instability of the voltage and current of the generator.2. Check whether the R918-T telescopic loader rotor and stator of the generator collide.
Check whether the engine rotor collides with the stator
7. After the telescopic loader machine is started, check whether the telescopic loader engine is running normally and whether the transmission system is normal (whether there is abnormal noise, noise, etc.). www.haiqinmachinery.com