Check the underground mine loader 5t liquid level of the engine oil pan, water tank, fuel tank, hydraulic steering tank, driving brake tank, and hydraulic lift, and add it if it is insufficient. When checking the oil pan level, the tractor must be parked on a level ground and the engine must be stopped for 15 minutes before proceeding.
(4) Add lubricating grease.When the load borne by the part is higher than the average design load, its wear will increase. In addition,
(5) Check the air pressure of the front and rear tires, and inflate them according to regulations when insufficient.
(6) Check and adjust the ,luyu 946 max free travel of the main, secondary clutches, and travel brake pedals.
(7) Check the tractor for air, oil, and water leaks, and eliminate any "three leaks".
2. Technical maintenance every 50 working hours
(1) Complete all technical maintenance tasks for each shift.
(2) Add lubricating grease.
The wheel loader 939f test shows that the wear of the cylinder will increase by two times when the engine works under unstable load compared with stable load. The engine working under normal load has low failure rate and long service life. he wear of excavators that are often in a wide range of load changes is greater than that of excavators that work continuously and stably. In general, the engine need check every day also . www.haiqinmachinery.com
The wheel loader 939f test shows that the wear of the cylinder will increase by two times when the engine works under unstable load compared with stable load. The engine working under normal load has low failure rate and long service life. he wear of excavators that are often in a wide range of load changes is greater than that of excavators that work continuously and stably. In general, the engine need check every day also . www.haiqinmachinery.com